DISTRIBUTOR EBARA PUMP | CNP | TORISHIMA | SAER | ATLAS COPCO

CM/CMP – SINGLE-IMPELLER CENTRIFUGAL PUMPS | SAER PUMPS

Suitable for domestic systems, water supply, small gardening applications and increasing pressure in mains water supply systems. They guarantee minimum hydraulic losses, and the Italian design and production process guarantees the highest levels of quality.

Materials: Cast iron, Brass, Plastic.

Specifications:
MAXIMUM FLOW RATE : 8 m3/h
MAXIMUM HEAD : 59 m
MAXIMUM POWER : 2.2 kW

Applications:
- Civil
- Industrial
- Mining
- Oil and Gas
- Underground extraction
- Water treatment

CF/CFP – GEAR PUMPS | SAER PUMPS

Volumetric electric gear pumps, produced in Italy, suitable for pumping oily, dense and viscous liquids free from solid bodies.

Materials: Cast iron and Bronze.

Specifications:
MAXIMUM FLOW RATE : 1.2 m3/h
MAXIMUM HEAD : 140 m
MAXIMUM POWER : 0.75 kW

Applications:
- Civil
- Industrial
- Mining
- Oil and Gas
- Underground extraction
- Water treatment

BP – THREADED CENTRIFUGAL PUMPS | SAER PUMPS

BP series electric pumps are used in surface and overhead irrigation systems, for taking water from lakes, rivers, tanks, and many and various other industrial uses. This product range is produced in Italy.

Materials: Cast iron, Brass.

Specifications:
MAXIMUM FLOW RATE : 210 m3/h
MAXIMUM HEAD : 63 m
MAXIMUM POWER : 22 kW

Applications:
- Civil
- Industrial
- Mining
- Oil and Gas
- Underground extraction
- Water treatment

TEX / TEX-D – SUBMERSIBLE PUMPS | SAER PUMPS

TEX: submersible electric pumps for waste water, passage of solid bodies up to 28 mm. TEX-D: submersible electric pumps for drainage, passage of solid bodies up to 4mm.

Materials: Cast iron, Brass.

Specifications:
MAXIMUM FLOW RATE : 39 m3/h
MAXIMUM HEAD : 18 m
MAXIMUM POWER : 1.5 kW

Applications:
- Civil
- Industrial
- Mining
- Oil and Gas
- Underground extraction
- Water treatment

PD – SUBMERSIBLE PUMPS | SAER PUMPS

Submersible electric pumps for drainage and waste water, suitable for the difficult, complex and often extreme working conditions required in this sector. These pumps stand out for their quality, solidity, compact size, design, reliability, ease of use and low running costs.

Materials: Cast iron, Stainless steel.

Specifications:
MAXIMUM FLOW RATE : 516 m3/h
MAXIMUM HEAD : 40 m
MAXIMUM POWER : 22 kW

Applications:
- Civil
- Industrial
- Mining
- Oil and Gas
- Underground extraction
- Water treatment

AP – SELF-PRIMING SEMI-OPEN IMPELLER | SAER PUMPS

Electric pump with open impeller allowing the passage of solid bodies up to 8 mm. Suitable for irrigation, agriculture and drainage.

Materials: Cast Iron.

Specifications:
MAXIMUM FLOW RATE : 40 m3/h
MAXIMUM HEAD : 18,7 m
MAXIMUM POWER : 2,2 kW

Applications:

- Civil
- Industrial
- Mining
- Oil and Gas
- Underground extraction
- Water treatment

OP – MULTI-STAGE HORIZONTAL PUMPS (SAER PUMPS)

OP – MULTI-STAGE HORIZONTAL PUMPS

SAER PUMPS,

Suitable for pumping clean water and chemically non-corrosive liquids, for residential uses, irrigation, agriculture and automated distribution in medium-small tanks.

Materials:

Cast iron, Stainless steel.

Specification:

MAXIMUM FLOW RATE : 40 m3/h
MAXIMUM HEAD : 162 m
MAXIMUM POWER : 12,7 kW

Applications:

- Civil
- Industrial
- Mining
- Oil and Gas
- Underground extraction
- Water treatment

TORISHIMA PUMP INDONESIA

Model Torishima Pump:
ETAN - Centrifugal Pump End Suction
CPEN - Stainless Steel Pumps

CAL/CAR - End Suction Volute Pumps

MMO - High Pressure Centrifugal Pump
SSC - Submersible Sewage Pump
CDM - Horizontal Spilte Case Double Suction Pumps

TORISHIMA PUMP INDONESIA

DISTRIBUTOR TORISHIMA PUMP INDONESIA, JAKARTA
Merk                : TORISHIMA
Type                : CER 125 - 200
Price                : CALL ( Bare Pump Only )

ELECTRIC HIDRANT PUMP
Merk                : TORISHIMA
Type                : 80X65-250
Cap.                 : 56 m3/ h
Head                : 80 m
Material          : 30 KW/ 380 V/ 50 HZ/ 3 PHASE/ 2900 Rpm
Price                : CALL C/W Dinamo Motor , Coupling, Base Plate

ENGINE HIDRANT PUMP
Merk                : TORISHIMA
Type                : 80X65-250
Cap.                 : 56 m3/ h
Head                : 80 m
Material          : 37 KW/ 380 V/ 50 HZ/ 3 PHASE/ 2900 Rpm
Price                : CALL C/W Diesel Engine , Coupling, Base Plate
CONTROL PANEL HYDRANT STANDART ( ELECTRIC JOCKEY & ENGINE )
Price                : CALL C/W Diesel Engine , Coupling, Base Plate

JOCKEY PUMP
Merk                : TORISHIMA
Type                : 50X40-250
Cap.                 : 100 Ltr/ m
Head                : 10 Bar
Material          : 11 KW/ 380 V/ 50 HZ/ 3 PHASE/ 2900 Rpm
Price                : CALL C/W Dinamo Motor , Coupling, Base Plate

WATER PUMP :
Merk                : TORISHIMA
Type                : ETA-N 50X40-250
Cap.                 : 12 m3/ h
Head                : 20 m
Sealling           : Mechanical Seal
Impeller          : Cast Iron FC 200
Power              : 2,2 KW/3Phase/ 380 V/ 50 HZ/ 4 Pole/ 1450 Rpm
Price                : CALL C/W Motor, Coupling, Base Plate

CENTRIFUGAL   PUMP   :
Merk                : TORISHIMA
Type                : 125X100-250
Price                : CALL( Bare Pump Only )
SPARE PART   PUMP ( SHAFT )   :
Merk                : TORISHIMA
Type                : CER 65-200
Price                : CALL

CENTRIFUGAL PUMP   :
Merk                : TORISHIMA
Type                : 100X80-400.1
Cap.                 : 50 m3/ h
Head                : 45 m
Power              : 18,5 KW/ 25 Hp/ 380 V/ 50 HZ/ 4 POLE/ 1500 Rpm
Price                : CALL C/W Motor, Coupling, Base Plate

CENTRIFUGAL   PUMP :
Merk                : TORISHIMA
Type                : 50X40-315.1
Cap.                 : 80 Ltr/ m
Head                : 25 m
Power              : 2,2 KW/ 3 HP/ 380 V/ 50 HZ/ 4 Pole/ 1450 Rpm
Price                : CALL C/W Motor, Coupling, Base Plate

JOCKEY PUMP   :
Merk                 : TORISHIMA
Type                : ETA-N 50X32-200
Cap.                 : 10 m3/h
Head                : 45 m
Power              : 5.5 Kw/380V/50Hz/2900Rpm
Price                : CALL C/W Motor, Coupling, Base Plate

WATER PUMP :
Merk                : TORISHIMA
Type                : ETA-N 50X40 – 200
Cap.                 : 20 m3/ h
Head                : 40 m
Sealling           : Gland Paking
Power              : 5,5 KW/ 7,5 HP/ 380 V/ 50 HZ/ 3 PHASE/ 2 POLE/ 2900 Rpm
Price                : CALL C/W Motor, Coupling, Base Plate

CENTRIFUGAL PUMP :
Merk         : TORISHIMA
Type         : CDM 300 X 250 KN
Power       : 45 KW/ 60 HP/ 380 V/ 50 HZ/ 3 PHASE/ 4 POLE/ 1450 Rpm
Price         : CALL C/W Motor Mez, Coupling, Base Plate
DESCRIPTION MATERIAL :
Casing      : Cast Iron
Impeller     : Bronze
Shalf         : Carbon Steel
Sealling     : Gland Paking

CENTRIFUGAL PUMP :
Merk         : TORISHIMA
Type         : CDM 300 X 250 KN
Power       : 45 KW/ 60 HP/ 380 V/ 50 HZ/ 3 PHASE/ 4 POLE/ 1450 Rpm
Price         : CALL C/W Dinamo Motor, Coupling, Base Plate

CENTRIFUGAL PUMP   :
Merk         : TORISHIMA
Type         : ETA-N 125X100-250.1
Cap.         : 750 GPM
Head         : 80 m
Power       : 116 KW/ 2900 Rpm
Price         : CALL C/W Diesel Engine , Coupling, Base Plate

Description Engine       :
Merk         : Isuzu
Type         : 6 BD 1
Power       : 116 KW C/W Accessories ( Radiator, Tool Kits, Etc )
Merk         : TORISHIMA
Type         : ETA-N 125X100-250.1
Cap.         : 750 GPM
Head         : 80 m
Power       : 100 KW/ 380 V/ 3 Phase/ 50 HZ/ 2 Pole/ 2900 Rpm
Price         : CALL C/W Motor, Coupling, Base Plate

TORISHIMA PUMP ( POMPA TORISHIMA )

SPARE PART CENTRIFUGAL PUMP ( IMPELLER ) :
Merk             : TORISHIMA
Type            : ETA-N 80X65-250
Material         : Cast Iron

CENTRIFUGAL PUMP :
Merk             : TORISHIMA
Type            : ETA-N 200X150-250
Cap.             : 2000 GPM
Head             : 20 M
Sealling         : Gland Paking
Power           : 30 KW/ 40 HP/ 380 V/ 50 HZ/ 4 Pole/ 1450 RPM

Merk             : TORISHIMA
Type            : ETA-N 200X150-315
Cap.             : 2400 GPM
Head             : 20 M
Sealling         : Gland Paking
Power           : 37 KW/ 50 HP/ 380 V/ 50 HZ/ 4 Pole/ 1450 RPM

CENTRIFUGAL PUMP :
Merk             : TORISHIMA
Type            : ETA-N 65X50-160
Sealling         : Mechanical Seal
Cap.             : 30 M3/ Hr
Head Max.     : 40 M
Power           : 7,5 KW/ 10 HP/ 380 V/ 3 Phase/ 50 Hz/ 2 Pole/ 2950 RPM

CENTRIFUGAL HYDRANT PUMP :
Merk             : TORISHIMA
Type             : ETA-N 125X100-250

SPARE PART PUMP ( MECHANICAL SEAL ) :
Merk             : TORISHIMA
Type             : CER 125-330

MULTI STAGE PUMP :
Merk             : TORISHIMA
Type            : MML 80/8
Cap.             : 63 M3/ Hr
T. Head         : 420 M
Power           : 132 KW/ 175 HP/ 380 V/ 3 Phase/ 2 Pole/ 2900 RPM

Merk                 : TORISHIMA
Type                 : 100X80-250
Cap.                  : 80 M3/ Hr
Head                 : 80 M
Sealling             : Mechanical Seal
Impeller            : Bronze
Power               : 45 KW/ 60 HP/ 380 V/ 3 Phase/ 50 Hz/ 2950 RPM

Merk                 : TORISHIMA
Type                 : 65X50-315.1
Sealling             : Mechanical Seal

CENTRIFUGAL PUMP          :
Merk             : TORISHIMA
Type            : 125X100-250.1
Sealling         : Mechanical Seal
Impeller        : Bronze

SPARE PART PUMP ( MECHANICAL SEAL ) :
Merk             : TORISHIMA
Type            : ETA-N 150X125-315

CENTRIFUGAL END SUCTION PUMP :
Merk             : TORISHIMA
Type            : 200X150-400
Cap.             : 550 M3/ Hr
Head            : 50 M
Sealling         : Gland Paking
Power           : 90 KW/ 125 HP/ 380 V/ 3 Phase/ 1450 RPM

CENTRIFUGAL PUMP :
Merk             : TORISHIMA
Type            : ETA-N 65X50-160
Sealling         : Mechanical Seal
Cap.             : 50 M3/ Hr
Head            : 25 M
Power           : 7,5 KW/ 10 HP/ 380 V/ 3 Phase/ 50 Hz/ 2 Pole/ 2950 RPM

CENTRIFUGAL PUMP :
Merk             : TORISHIMA
Type            : ETA-N 65X50-160
Sealling         : Mechanical Seal
Cap.             : 50 M3/ Hr
Head            : 25 M
Power           : 7,5 KW/ 10 HP/ 380 V/ 3 Phase/ 50 Hz/ 2 Pole/ 2950 RPM

CENTRIFUGAL PUMP ( SEMI OPEN IMPELLER )   :
Merk             : TORISHIMA
Type             : ETA-N 100X80-315
Cap.             : 60 M3/ Hr
Head            : 30 M
Aplikasi         : “UNTUK BUBUR KERTAS”
Power           : 22 KW/ 30 HP/ 3 Phase/ 50 Hz/ 380 V/ 1450 Rpm

CENTRIFUGAL PUMP :
Merk             : TORISHIMA
Type            : CER 80-200
Head            : 40 M
Material         : Cast Iron
Sealling         : Mechanical Seal
Power           : 22 KW/ 30 HP/ 380 V/ 50 HZ/ 2950 RPM

CENTRIFUGAL PUMP   :
Merk             : TORISHIMA
Type             : CER 80-200
Cap.             : 110 M3/ Hr
Head            : 40 M
Power           : 22 KW/ 30 HP/ 3 Phase/ 50 Hz/ 380 V/ 2950 Rpm

CENTRIFUGAL PUMP :
Merk             : TORISHIMA
Type            : CER 32-200
Impeller        : Bronze
Sealling         : Mechanical Seal
Power           : 5,5 KW/ 7,5 HP/ 380 V/ 3 Phase/ 50 HZ/ 2900 RPM

CENTRIFUGAL MULTI STAGE PUMP :
Merk             : TORISHIMA
Type            : MML 5/13
Cap.             : 24 M3/ Hr
Head            : 420 M
Power           : 55 KW/ 75 HP/ 380 V/ 50 HZ/ 2950 RPM

CENTRIFUGAL PUMP :
Merk             : TORISHIMA
Type            : ETA-N 100X80-200
Cap.             : 150 M3/ Hr
Head            : 50-60 M
Sealling         : Gland Paking
Power           : 37 KW/ 50 HP/ 380 V/ 3 Phase/ 50 Hz/ 2950 RPM

Merk             : TORISHIMA
Type            : ETA-N 100X80-200
Cap.             : 100 M3/ Hr
Head            : 50-60 M
Sealling         : Gland Paking
Power           : 30 KW/ 40 HP/ 380 V/ 3 Phase/ 50 Hz/ 2950 RPM

CENTRIFUGAL PUMP :
Merk             : TORISHIMA
Type            : ETA-N 125X100-250
Cap.             : 150 M3/ Hr
Head            : 20 M
Sealling         : Gland Paking
Power           : 15 KW/ 20 HP/3Phase/ 380 V/660 V/50 HZ/ 1450 Rpm

Merk             : TORISHIMA
Type            : ETA-N 125X100-200
Cap.             : 150 M3/ Hr
Head            : 15 M
Sealling         : Gland Paking
Power           : 11 KW/ 15 HP/3Phase/ 380 V/660 V/50 HZ/ 1450 Rpm

Untuk info tipe/ model dapat menghubungi kontak kami, ataupun konsultasi pengadaan instalasi pompa industri

SSC | Submersible Sewage Pump | TORISHIMA

SSC - Raw Water Intake / Submersible Sewage Pump Non Clogging Impeller, Torishima

Closed impeller design suitable for non clog pump applications. Wet parts material available in grey iron and stainless steel.

MOTOR
- 2 ~ 14 pole
- Insulation Class : F or H
- 1 Phase or 3 Phase / 220 V / 380 V / 440 V
- 420 ~ 3000 rpm
- Starting Methods : DOL, Star Selta, Soft Starter, VSD
- Standard Power : 0,55 kW ~ 250 kW
Other motor ratings available upon request

PUMP
- Impeller : Enclosed type
- Material :
   - Impeller            : FC 200 / SCS 13 / SCS 14
   - Casing              : FC 200/ SCS 13 / SCS 14
   - Suction Cover   : FC 200 / SCS 13 / SCS 14
   - Shaft                 : SCM 440 / SUS 410 / SUS 304 / SUS 316
   Other material are available upon request
- Connecting Method : Flange Coupling / Hose Coupling / Automatic Discharge Connector

APPLICATION
- Raw water intake slurry and fibrous material in sewage water
- Transfer solid at sewage, waste water treatment plant
- Effluent transfer from waster & waste water treatment plant
- Fountain, decorative waterfall
- Supply water for industry

FEATURES
- Minimize of clogging foreign materials
- Multi-pole applicable according to water quantity
- Including the electric motor protector
- Perfect watertight with double mechanical seal

MMO | HIGH PRESSURE CENTRIFUGAL PUMP | TORISHIMA

HIGH PRESSURE CENTRIFUGAL PUMP, MMO Model by Torishima Pump

MMO high pressure centrifugal pumps are pumps of ring section type. They are suitable for clean media free from abrasive and solid particles and not liable to attack the pump mechanically (abrasion) or chemically (corrosion).

FEATURES
1. Compact design
2. High efficiency impeller (3 dimensional closed type impeller)
3. Outdoor design
4. High temperature operation w/o cooling
5. Nozzle orientation freely chosen
6. Material combination
7. Horizontal Design
8. Shaft protecting sleeve

TECHNICAL DATA
Total Head     : up to 400 m
Capacity        : up to 112 m3/hr
Size              : 32 to 65 mm
Temperature : up to 100 Degree Celsius

BENEFITS
1. Small space required
2. Assured high efficiency (low operational cost)
3. Flexible application
4. Elimination of cooling water feed & return piping & monitoring instrument reduce
     cooling water requirement
5. Easy piping arrangement
6. Possible combination of three different impeller diameter just to fit the requires specification

APPLICATIONS
They are used in Water Works, Pressure Boosting Stations, Sprinkling and Irrigation Installations, Fountains, Fire-Fighting Systems and in Mechanical Engineering. They are handle Boiler Feed water and Condensate, Circulating Cooling Water and Hot water and are used for Power Water Generation and in Carswashes.

CAL/CAR | END SUCTION VOLUTE PUMPS | TORISHIMA

END SUCTION VOLUTE PUMPS - MODEL CAL/CAR

The TORISHIMA CA series are high efficiency end-suction volute pump, called “Torishima Eco Pump”. They ensure high performance operation for general pumps to meet the customers’ individual requirement.

The three-dimensional impeller provides high efficiency, low NPSH and stable characteristic,
plus the impeller diameter is trimmed to the customer’s specification for energy saving. In addition to the efficient impeller design, the adoption of ultra-high-efficiency motor (IEC IE3) conserves energy
and reduces the life cycle costs of pumps and CO2 emissions.
This totally optimized design makes CA series a highly eco-friendly general pump.

The CA series are available in two types of materials, CAL in cast iron and CAR in stainless steel,
and suitable for wide range of applications from general industry utility, food & drink manufacture, air conditioning system, iron & metal manufacture to chemical plants.
CA is a high efficiency pump which has been created from our historical technology. The CA is an Eco Pump which can save the energy and reduce CO2

TECHNICAL DATA
Capacity           Q      Up to 600 m3/hr
Total Head        H      Up to 100 m
Temperature     T      Up to 80 Degree Celsius (standard) and 220 Degree Celsius (option)
Pump Size       DN    32 to 150 mm

APPLICATIONS
- Utility
Co-generation, Air Conditioning System, Waste Water Treatment, Pure Water Manufacturing.
- Iron & Metal Manufacturing
Power Generation Plant, Rolling Plant, Desulfurization Plant, Roll Coolant Plant, Plating Plant.
- Food Industries
Manufacturing Process, Refrigeration System, CIP System.
- Car Industries (Painting Plant)
Degreasing Process, Transformation Process, Electrodeposition Process.
- Garbage Incinerating Plant
Power Generation Equipment, Equipment Lowering the Temperature of High Temperature Waste Gas.
- Other Liquid Handle
Brine, Acetone, Chlorization Calcium, Potassium Chloride, Alkali Liquid, Ethylene Glycol, Nitric Acid, Sulfuric Acid, Sodium Hydroxide, Sal Volatile, Ammonium Solution

KATALOG CAL/CAR TORISHIMA

DOWNLOAD KATALOG

CPEN | STAINLESS STEEL PUMPS | TORISHIMA

CENTRIFUGAL END SUCTION - STAINLESS STEEL PUMPS : MODEL CPEN

CPEN is a new model of Stainless Steel Semi - Process Pump with stable pump performance, high efficiency and low NPSH required. Compact high efficiency for economical energy-saving design.

FEATURES
1. Back pull out design
2. High precision casting, high efficiency closed type impeller
3. Single mechanical seal used as standard type with SiC material
4. Stainless steel material only for wet part (low cost pump)
5. High temperature operational (optional)
6. Greased filled sealed ball bearing in bearing housing
7. The shaft is protected by replaceable sleeve

TECHNICAL DATA
Total Head      H    up to 88 m
Capacity         Q    up to 240 m3/hr (4 m3/min)
Size              DN   40 to 200 mm
Temperature   T    - 10 up to 70 Degree Celsius (standard), - 15 up to 140 Degree Celsius (optional)

BENEFITS
1. Easy maintenance (quick repair work)
2. High efficiency, highly stable characteristics
3. Low NPSH required
4. Flexible application

APPLICATIONS
Clean Water, Hot Water, Pure Water, Brine, Sea Water, Alkaline Water, Acid Liquid, Solvent, Oil, Caustic Soda, etc.

KATALOG CPEN STAINLESS STEEL PUMPS TORISHIMA

Click DOWNLOAD CATALOG

ETA-N | CENTRIFUGAL PUMPS END SUCTION | TORISHIMA

CENTRIFUGAL PUMPS END SUCTION - MODEL ETA-N

ETA.N series are industrial pumps of back pull out design according to JIS B 8313

OPERATING RANGE
Capacity (Q) Up to 620 m3/hr ( 170 l/s)
Total Head (H) Up to 100 m
Temperature (T) - 10 to 100 Degree Celsius
Pressure (P) Up to 10 bar
Pump Size 32 to 150 mm

APPLICATIONS
- General water supply, irrigation and drainage
- Pumping of sea water, brine, alkali and condensate
- Circulating hot and cold water supply
- Sprinkling & fire fighting system
- Swimming pool

DESIGN
- End suction volute pumps with vertical centerline discharge
- Back Pull Out (BPO) design allows the removal all rotating elements without disturbing the casing, piping or motor

MATERIAL EXPLANATION
Bronze or BC2 or BC6 quality is recommended for sea water application or other corrosive media

IMPELLER
- Closed, radial flow impeller fitted with protective wear ring
- Balanced hydraulically
- Trimming of impeller is possible

BEARING
- Permanent lubricated grease ball bearings
- Oil lubricated bearing

SHAFT SEAL
- Strong stuffing boxes
- Single acting mechanical seal are available

KATALOG TORISHIMA PUMP - ETA.N Click : DOWNLOAD